Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Replace C120 Classic with E120 Classic?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replace C120 Classic with E120 Classic?
06-11-19, 11:41 AM
Post: #11
willyritch Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2017
Reputation: 0
RE: [CA11] Replace C120 Classic with E120 Classic?
I finally got all the pieces necessary to get the sounder working--the DSM30 is now connected to my E-Series display via a cable assembly constructed from a pair of SeaTalkhs to RJ45 (M) Cables which have been joined with a SeaTalkhs Crossover Coupler.

It all works but every 5-10 minutes the display loses contact with the transducer or the DSM 30 and I get an alarm. It usually comes back online after a few seconds.

Any suggestions on troubleshooting?

Thanks.

w
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Replace C120 Classic with E120 Classic? - willyritch - 06-11-19 11:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication