Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] e7 problems - Should I repair or replace? Axiom? New e7?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] e7 problems - Should I repair or replace? Axiom? New e7?
06-12-19, 01:55 PM (This post was last modified: 06-12-19 01:56 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] e7 problems - Should I repair or replace? Axiom? New e7?
Welcome to the Raymarine Forum Pamlico,

We're sorry to learn of the problem reported with the MFD's UniController. As indicated within the FAQ found here, a MFD having a hybridTouch user interface is recommended for offshore operators and those who will be operating the MFD when its screen is exposed to weather or spray. Axiom Pro MFD rather than Axiom MFDs would be recommended for those operating in such conditions. I would recommend getting the e7 MFD repaired. The cost to repair the MFD (assuming that the problem was limited to the MFD's UniController would be about a third of the cost of an Axiom 7 MFD.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] e7 problems - Should I repair or replace? Axiom? New e7? - Chuck - Raymarine - Moderator - 06-12-19 01:55 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication