Raymarine forum / Raymarine Forums / Multifunction Displays v / RL70C not communicating with RC631

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RL70C not communicating with RC631
06-01-16, 02:29 PM (This post was last modified: 06-01-16 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #14
dkritter Offline
Junior Member
**
 		Posts: 17
Joined: Mar 2016
Reputation: 0
RE: RL70C not communicating with RC631
Thanks Chuck,

One last item, i did remove the red lead from the ST1-STNG converter from the 400G but at the same time I removed the red lead from the 400G to the ST6001. When I did this I did not get anything at the ST6001. So should I just remove the red lead from the ST1-STNG and leave the red lead attached from the 400G to the ST6001+?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: RL70C not communicating with RC631 - dkritter - 06-01-16 02:29 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication