[CA] [CA11] M200 ENGINE MONITOR TO AXIOM 9PRO

[Chuck - Raymarine - Moderator]

Miguel,

Q1. Do I have to change anything in the Axiom 9?
A1. Negative. The only thing which one need do is to configure the number of engines within the MFD's Boat Details feature.

Q2. Is there a way to monitor de comunication flow with the AXIOM?
A2. Unfortunately no. For this reason, the NMEA 2000 analyzer recommended within the previous response was identified.

Should the equipment all be operational, interfaced correctly, and should NMEA 2000 PGNs be transmitted from the NMEA 2000 engine gateway, then the most common cause for the reported symptom is that the engine gateway is Instance IDs within the transmitted PGNs which are inconsistent with that specified within the FAQ found here.