The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / AIS v / [DG] [DG11] AIS - Own vessel appearing as AIS target

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] AIS - Own vessel appearing as AIS target
06-18-19, 10:12 AM (This post was last modified: 06-18-19 10:41 AM by Derek - Raymarine - Moderator.)
Post: #1
Peter ML Offline
Junior Member
**
 		Posts: 5
Joined: May 2019
Reputation: 0
[DG11] AIS - Own vessel appearing as AIS target
Hi - I have seen similar threads to this where the vessel has its own 'ghost' appearing as an AIS target on the MFD. Instructions on other threads have been to update AIS software. I had the same problem so have updated all software but the problem persists and is continually triggering the AIS collision alarm so I've had to disable the alarm for now - which is not ideal.

I have also checked the antenna connections and signal quality which appear fine and VSWR was low.

My installation and software versions are as follows:

eS97 MFD: LHII v19.03
AIS650: v2.02 (installed with AIS100 splitter)
Quantum: v1.62
Quantum wired adaptor: v1.17
ACU200: v2.23
EV1: v3.02
P70: v3.08
i50/i60: v1.06

Any other thoughts what might be causing this and how to fix?

Thanks,
Peter
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] AIS - Own vessel appearing as AIS target - Peter ML - 06-18-19 10:12 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication