Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro Settings; NMEA 38,400 or 4800?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro Settings; NMEA 38,400 or 4800?
06-18-19, 03:56 PM (This post was last modified: 06-18-19 03:58 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro Settings; NMEA 38,400 or 4800?
Welcome back to the Raymarine Forum Fish On,

The setting to be used for the MFD's NMEA 0183 Port 1 and Port 2 settings will be determined by the NMEA 0183 communications BAUD rate of the NMEA 0183 device(s) which you intend to interface to these ports. Should you provide the makes/models of such devices, then it may be possible to specify which setting to use and which setting to use. The same applies to the Transmission Mode setting. The AIS700 would typically be interfaced to the MFD via NMEA 2000 rather than NMEA 0183 communications.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro Settings; NMEA 38,400 or 4800? - Chuck - Raymarine - Moderator - 06-18-19 03:56 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication