The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] St 4000 control unit

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] St 4000 control unit
06-24-19, 01:27 AM (This post was last modified: 06-24-19 02:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
Decobham Offline
Junior Member
**
 		Posts: 2
Joined: Jun 2019
Reputation: 0
[DG11] St 4000 control unit
Hi,

I have an old ST 4000 autohelm system on my boat - control unit, fluxgate compass and wheel drive unit (?Mk1 - its black). The problem is that the head unit (control) is not working properly and I need to replace it. I've been told that an ST4000+ unit will work but these are rare to find. Is there anything else that would be compatible with this system or do I have to replace the whole lot.

Thanks in advance

Pete
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] St 4000 control unit - Decobham - 06-24-19 01:27 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication