The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] fuel trip

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] fuel trip
06-24-19, 12:55 PM (This post was last modified: 06-24-19 03:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
Matt272 Offline
Junior Member
**
 		Posts: 4
Joined: Jun 2019
Reputation: 0
[CA11] fuel trip
LightHouse 3.9

Are the parameters displayed in the Fuel/trip window calculated based off the combined fuel rate (gal/hr) from the mercury smart craft system (vessel view 403) and SOG? Unfortunately, the tank calibration was not completed initially in the smart craft system so the fuel gauge is not very reliable. If i can assume the flow rate to the MFD is accurate, can i assume the est fuel remaining is accurate (in the MFD)?

The fuel dashboard in the mfd mimics the est fuel remaining from the smart craft system. "Is the distance till empty" calculation based on smart craft fuel gauge or what the mfd estimates of what is remaining.

Your help would be greatly appreciated
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] fuel trip - Matt272 - 06-24-19 12:55 PM
RE: [CA11] fuel trip - Matt272 - 06-26-19, 01:43 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication