The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] EV-1 “oversteering”

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] EV-1 “oversteering”
06-26-19, 05:52 PM (This post was last modified: 06-28-19 02:39 AM by Derek - Raymarine - Moderator.)
Post: #1
ritchardfindlay Offline
Junior Member
**
 		Posts: 4
Joined: Mar 2016
Reputation: 0
[DG11] EV-1 “oversteering”
I installed a new EV-1 with wheel pilot a few months ago on a 14,000 lb sailboat. When you use it, it tends to oversteer all the time, or work all the time, never stopping. It is so busy that today in a modest following sea it turned the boat into a seesaw, rolling back and forth. Not just uncomfortable, but the unit is working so hard to keep a course.

I have tried all 3 preference settings on the P70 head, and all have the same habit. Did I goof up the calibration?

My old ST 60 had multiple adjustments, this one just one simplistic one.

What to do?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] EV-1 “oversteering” - ritchardfindlay - 06-26-19 05:52 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication