[LW] [LW11] Axiom Pro, missing wind indicator and dashboard

[bjojoh]

(06-26-19 03:46 AM)Louise - Raymarine - Moderator Wrote:  Dear bjohjoh,

Thank you for your post.

The dashboard app is one of the generic apps that are shown when a software update or reset is done. You can create a dashboard app by holding your finger down on a blank app >layout>full screen>dashboard.

Within the dashboard app>menu>sailing page, you can also customize page within these settings.

For layline data you need to following input;
wind
speed through the water
GPS
heading

Within the home page you will need your vessel type set to sailing. Sail performance needs to be set to polar or fixed angles.

Within chart application ensure you have laylines toggled on within the sub menu when you hover over the vessel icon. Chart app>menu>settings>laylines - here are settings for your layline data too. Do ensure you have chart detail set to a minumum of detailed otherwise the layline data is not available.

Many Thanks
Louise

Hi Luise!
Thank you, I found the dashboard and I have the wind indicator there in the sailing view (angle and speed) + all the other data. Wind and speed trough water is received from Seatalk via ST-NMEA 0183 converter. I have toggled layline within chart sub menu.
BUT I have two issues (except for laylines is not showing yet):
Q1. I don´t have the wind symbol in my chart application (the little yellow drop symbol)? Vessel type is set to "cruising sailing" or similar: I have also tried "Competition sailing". I forgot to set chart detail to minimum. Can that be the issue with the wind symbol as well (the yellow drop in chart app)?
Q2: ST60 wind speed is set to m/s (not knots). In the dashboard, the speed is approx. twice the value of what the ST60 wind instrument is showing. Unit in the dashboard is m/s. It looks like there is a conversion error in the MFD or the ST60 Wind instrument sends the speed in knots over Seatalk (ST60 display is m/s)?

Kind regards
Björn Johansson