[CA] [CA11] Insalling axiom 12 rvx

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum FISHFEARME,

The Axiom Pro 12 RVX, EV150 autopilot, and AIS700 are designed to communicate with one another via a powered and properly terminated SeaTalkng / NMEA 2000 backbone. This backbone will need to feature a sufficient number of spur sockets to accommodate interfacing each of these devices to the backbone. The EV150 autopilot is supplied with sufficient SeaTalkng networking components to create and power a backbone which would permit the Evolution autopilot components to communicate with one another. Please click here to view a FAQ addressing how additional spur sockets may be added to this backbone to permit the AIS700 and Axiom Pro RVX MFD to each be interfaced spur socket within to the backbone. The AIS700 will be interfaced to the a spur socket within the backbone via an appropriate length of SeaTalkng Spur Cable. The Axiom Pro 12 RVX MFD will be interfaced to the a spur socket within the backbone via an A06075 / 39.4in (1.0m) DeviceNet Female to SeaTalkng Spur Cable.

Regarding the Quantum 2 radome, the radome may be purchased with or without a Quantum Power Cable. If you have already purchased the radome, did you purchase it a Quantum Power Cable? Will you be seeking a wired interface between the Quantum 2 radome and the MFD or will you be seeking to have the Quantum 2 radome communicate with the system via Wi-Fi?