[LW] [LW11] Mfd/nematode 0183

[Nandi]

Hi Louise, attached wiring diagrams:
(1) shows new wiring to install es128. The extension cable used was Belden 8103 screened data cable. The VDO plotter is a standalone unit, only connected to the AIS engine but is not used or switched on.
(2) shows the B&G Network connections prior and following es 128 install.
(3) shows NMEA connections for B&G NAV unit, which is where NMEA connections must be made to the Network system.

hope this helps
Cheers
Alan