The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / C120/DSM300 No Data Source

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C120/DSM300 No Data Source
07-02-19, 11:12 AM
Post: #1
Tombac3 Offline
Junior Member
**
 		Posts: 1
Joined: Feb 2018
Reputation: 0
C120/DSM300 No Data Source
I have a C120 MFD with a DSM300/Airmar B-160 and am currently having issues with No data Source/DSM Connection Lost. It started out with intermittent DSM Connection Lost and progressively got worse. For a while, the DSM would flash an amber code 8 while malfunctioning. I have checked voltage supply (12.6 vdc), connection and pin integrity as well as cable integrity, to no avail. I now have a No Data Source with a momentary green flicker to constant amber LED status on my DSM. Also, in the fishfinder setup page, all of my DSM and transducer functions are now greyed out.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
C120/DSM300 No Data Source - Tombac3 - 07-02-19 11:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication