The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] Connecting NMEA 0183 to SeaTalk

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Connecting NMEA 0183 to SeaTalk
07-02-19, 07:02 PM (This post was last modified: 07-03-19 03:04 AM by Louise - Raymarine - Moderator.)
Post: #1
sailingdeacon Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2019
Reputation: 0
[LW11] Connecting NMEA 0183 to SeaTalk
I have a Garmin 541s connected to Raymarine P70 autopilot, using the SeaTalk NMEA 2000 cables and a T-connector. I want to connect my vhf Standrd Horizon GX1265S to this to provide gps data with the vhf DSC. But the VHF is NMEA 0183. There is a cable coming out the back of the VHF with a 8 pin connector. (also have a 8pin connector that can connect to it with 4 wires at the end (made for Loran NMEA 0183)
Is there a cable for this? or some manual way to connect using the standard cable
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Connecting NMEA 0183 to SeaTalk - sailingdeacon - 07-02-19 07:02 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication