[CA] [CA11] Fuel Tank Calibration

[mannery]

After a couple more attempts I was able to go thru the above procedure with the end result being that the Axiom 9 appears to have calibrated the tank successfully.

The key point that seems to have resulted in success was to re-do the Oceanic Systems "Tank Level Calibration" procedure as outlined in their "3271-Installation-Instructions.pdf" Step 2. I followed this procedure three times in succession before then again following the procedure outlined in the Lighthouse 3 advanced operations manual section on tank calibration.

It is to be seen how well the tank is calibrated as for now it is simply showing Full (as it should).

I will report back to this thread after getting on the water and burning some fuel which will allow me to compare a visual inspection of tank level against what the Axiom is showing.