[LW11] Connecting NMEA 0183 to SeaTalk

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[LW] [LW11] Connecting NMEA 0183 to SeaTalk

07-05-19, 10:54 AM

Post: #7

Louise - Raymarine - Moderator Offline

Administrator

Posts: 867
Joined: Sep 2018
Reputation: 1

RE: [LW11] Connecting NMEA 0183 to SeaTalk

Dear Sailingdeacon,

Thank you for your reply.

The cable is just an adaptor cable, modified to use with the convertor block. The 5 way block stores the software to convert STng to NMEA0183, therefore this is required if you wish to supply the VHF with GPS data.

The yellow wire in the negative NMEA0183 in and the red is the positive NMEA0183 in.

Many Thanks
Louise

« Next Oldest | Next Newest »

Messages In This Thread

[LW11] Connecting NMEA 0183 to SeaTalk - sailingdeacon - 07-02-19, 07:02 PM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - Louise - Raymarine - Moderator - 07-04-19, 10:42 AM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - sailingdeacon - 07-04-19, 11:50 AM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - sailingdeacon - 07-04-19, 12:28 PM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - Louise - Raymarine - Moderator - 07-05-19, 07:07 AM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - sailingdeacon - 07-05-19, 09:21 AM

RE: [LW11] Connecting NMEA 0183 to SeaTalk - Louise - Raymarine - Moderator - 07-05-19 10:54 AM

User(s) browsing this thread: 7 Guest(s)