[CA] [CA11] DST800 to iTC-5

[jmur2808]

Apologies re the attachment Chuck, I never got round to posting a reply.
This is a update. I had the 2 x iTC-5's checked by Raymarine and both were OK.
Although I still have the same problem, Temp is OK but the Speed will still not connect to either of the iTC-5's.
The DST800 was installed August 2018 and worked for approx 6 months and then I received a 'Current Limited" error. I then installed an EV1 and ASU400. Everything else in my installation is working correctly and eveything else is visible from both my e127 and i70s.
Speed is greyed out in the i70s and neither can find the iTC-5 to select Speed. They can find the iTC-5 for Temp, Fluxgate compass, Depth and Wind.
The speed test with a meter between the shield and green wire is still OK.

Is there any further assistance that you could offer??

regards