The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [DG] [DG11] Do I have an ST50 or ST50+ wind display?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Do I have an ST50 or ST50+ wind display?
07-08-19, 06:59 AM (This post was last modified: 07-09-19 11:15 AM by Derek - Raymarine - Moderator.)
Post: #1
Carib Offline
Junior Member
**
 		Posts: 6
Joined: Jul 2019
Reputation: 0
[DG11] Do I have an ST50 or ST50+ wind display?
Hi,

My boat has an ST50 or ST50+ wind display, but I can't work out which it is.

Looking at the product manuals, the ST50 and 'plus' seem identical - but I understand these have different networking capabilities depending on the model, which I will ask about when i know..

Please see the attached photo. Note the left button is marked 'CAL' as this seems to be marked differently on some displays.

There is also a serial no. on the back which is Z1350230689.

The transducer is the older style with square cups.

Thanks!


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Do I have an ST50 or ST50+ wind display? - Carib - 07-08-19 06:59 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication