Raymarine forum / Raymarine Forums / AIS v / [TG] [TG11] AIS 650 stops displaying targets

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] AIS 650 stops displaying targets
07-10-19, 12:22 AM
Post: #11
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] AIS 650 stops displaying targets
Hello Kr7,

We have had a few reports of AIS700s which have seemed to stop outputting AIS data intermittently, but restart after a USB cable is connected. Can you tell me the serial number of your AIS and also your MFD's software version, so that I can add that into our engineering investigation? You can find both of these things in Home > Settings Getting Started (for the MFD software) and Network > Diagnostics > Product Info for the AIS serial number.

Thanks,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] AIS 650 stops displaying targets - Tom - Raymarine - Moderator - 07-10-19 12:22 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication