[TG] connecting A50 to wheel pilot evolution 100

[Tom - Raymarine - Moderator]

Hello Avi,

I am sorry to say that it appears you've been misinformed. Perhaps the person you spoke with thought you had a different model chartplotter or pilot from what you list here. With A50 and EV100, no need for the convertor, you just connect the A50 into the pilot's STNG network at and spare spur (white) socket. If you don't have a spare white socket in the EV's network then you'd need another backbone cable and T-piece or 5-way junction in order to extend the existing network, and you can in fact use the convertor for this purpose if you have a spare backbone (blue) cable you can use to connect it in, but the convertor function of the device itself (centre yellow connector) is redundant in that system.

Regards,
Tom