[LW] [LW11] Ray 240 VHF with e120W

[Bdfritz]

Thanks. So to be clear before i cut my $34 cable (lol) -- i'll cut my adapter cable -- the ST1 (rectangular female connector) to STNG cable coming from the VHF Transceiver into my STNG backbone (2 halves at that point; then only connect the yellow wire to yellow wire (data); green to green (-12VDC); dropping the Red (+12VDC) out of the loop. And then just plug that back into the backbone and transceiver. Correct?

Thanks

Picture attached of the Converter Kit I purchased for about $100 at West Marine.