[LW11] Ray 240 VHF with e120W

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[LW] [LW11] Ray 240 VHF with e120W

07-12-19, 11:10 AM (This post was last modified: 07-15-19 10:33 AM by Chuck - Raymarine - Moderator.)

Post: #7

Bdfritz Offline

Junior Member

Posts: 12
Joined: Mar 2019
Reputation: 0

RE: [LW11] Ray 240 VHF with e120W

Here's a pic of the Cable once cut (so everyone reading this thread in the future sees what's inside before cutting it).

It makes perfect sense about the positive power. Now i'm wondering if there's some setting on the e120W that needs to be changed to be able to see it.

the LED Status is solid green.

Any other thoughts? Iâ€™m thinking I should connect the VHF directly to the MFD and see if anything happens.

Attached File(s) Thumbnail(s)

« Next Oldest | Next Newest »

Messages In This Thread

[LW11] Ray 240 VHF with e120W - Bdfritz - 07-11-19, 02:55 PM

RE: [LW11] Ray 240 VHF with e120W - Louise - Raymarine - Moderator - 07-12-19, 10:00 AM

RE: [LW11] Ray 240 VHF with e120W - Bdfritz - 07-12-19, 10:38 AM

RE: [LW11] Ray 240 VHF with e120W - Louise - Raymarine - Moderator - 07-12-19, 10:43 AM

RE: [LW11] Ray 240 VHF with e120W - Bdfritz - 07-12-19, 11:00 AM

RE: [LW11] Ray 240 VHF with e120W - Bdfritz - 07-12-19, 11:05 AM

RE: [LW11] Ray 240 VHF with e120W - Bdfritz - 07-12-19 11:10 AM

RE: [LW11] Ray 240 VHF with e120W - Louise - Raymarine - Moderator - 07-26-19, 07:25 AM

User(s) browsing this thread: 2 Guest(s)