[CA] [CA11] Networking

[Papa Ralph]

Chuck, I now have implemented the wiring indicated in this post (Piacere Network). I seems to have a problem getting the Axiom to activate the Autopilot.

When I set a waypoint on the Axiom and then do a "goto waypoint"; the plotted shows the ccorrect heading but the AutoPilot never gets activated.

Looking at the diagram I'm thinking that I need another connection from plotter to Autopilot Controller/ S1 Computer. Please review and advise.

Note the Autopilot works using the Control head, just not from the Axiom. Boat speed, wind and depth are all displaying on the Axiom.

thanks,
RALPH