[CA] [CA11] New wind transducer (connected via itc5) stopped working

[Chuck - Raymarine - Moderator]

kray,

Please accept our apology for the reported problem. This is certainly not the performance that should be expected. The damaged wind transducer components should be sent to Raymarine’s Product Repair Center to be serviced. It would be recommended that your comments concerning the moisture found within be included within the repair comments. Although not specified and typically not necessary, a best installation practice for connectors which are directly exposed to the marine environment is to pack them with dielectric compound (ex. Dow Corning DC-4, etc.) to provide an extra layer of protection.