[DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

07-16-19, 11:29 AM

Post: #2

Derek - Raymarine - Moderator Offline

Administrator

Posts: 1,416
Joined: Nov 2017
Reputation: 9

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

Hi ktallent
Thank you for your enquiry.

The network you describe is correct, except that the SeaTalk part of the network should have it's own independent power supply.

Basically, the STng should have it's own 12v power supply and the SeaTalk part of the network also it's own supply, then isolate the SeaTalk power from the yellow socket connection on the E22158 converter, this will ensure that the two supplies are isolated, leaving the E22158 converter powered only by STng.

Regards

Derek

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-10-19, 01:02 PM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-16-19 11:29 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-16-19, 02:21 PM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-17-19, 06:50 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-17-19, 10:00 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-19-19, 11:28 AM

User(s) browsing this thread: 2 Guest(s)