[CA] [CA11] Uncommanded 360 while in track mode

[hynespa]

I appreciate your response Chuck. A couple follow up questions:

a) I am not sure what the Fluxgate compass looks like. The one on my boat would be the original one installed with the S3G course computer when the boat was built in 2005. Is there a link to a photo of the 2005 Raymarine fluxgate compass, so that I can correctly identify it when I go searching in the boat for it?

b) Is there a photo or diagram showing where the gyro is plugged into on a S3G course computer board or step by step instructions on opening the S3G and unplugging the fluxgate?

c) I have attached a copy of the Raymarine S3G installation / wiring diagram. In the Fluxgate compass test it says to unplug the transducer and connect the multimeter to combinations of the Red/Green/Yellow/Blue wires. I don't see where the transducer is wired into the S3G - so I want to make sure I'm unplugging the right thing. Could you point out where it is wired into the S3G?

Thanks!