[DG] [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

[Derek - Raymarine - Moderator]

Hi ktallent,

Thanks for the feedback,

The attached schematic is correct in principle, there needs to be terminators, (small blue plug type things) in each of the blue sockets in the E22158 converter block.

The comment about the power supplies for the SeaTalk and STng remains the same, Basically, the STng should have it's own 12v power supply and the SeaTalk part of the network also it's own supply, then isolate the SeaTalk power from the yellow socket connection on the E22158 converter, this will ensure that the two supplies are isolated, leaving the E22158 converter powered only by STng.

Regards

Derek