Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Problems with v3.9.46

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Problems with v3.9.46
07-17-19, 07:18 AM
Post: #11
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Problems with v3.9.46
karlista,

There were many odd issues related to the LH3 v3.8.x and v3.9.x software, many of which, were corrected through execution of the Power ON Factory Reset procedure. That said, LH3 v3.10.39 was released today. It is recommended that this software be installed on the system's MFDs and that the Power ON Factory Reset procedure then be executed to correct the reported behavior.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Problems with v3.9.46 - karlista - 05-18-19, 10:59 PM
RE: [CA11] Problems with v3.9.46 - Chuck - Raymarine - Moderator - 07-17-19 07:18 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication