[DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

07-17-19, 10:00 AM (This post was last modified: 07-17-19 10:04 AM by Chuck - Raymarine - Moderator.)

Post: #5

ktallent Offline

Junior Member

Posts: 4
Joined: Jul 2019
Reputation: 0

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata)

Derek
Thanks again for the confirmation, and I will do a you say above but with regard to the power supply isolation between the two networks, can you tell me the reason for this. I believe I have read in the network documentation that a STng can power a ST1 network and vice versa, whereas your notes above conflict with that. Just enquiring purely out of interest.
Keith

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-10-19, 01:02 PM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-16-19, 11:29 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-16-19, 02:21 PM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-17-19, 06:50 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - ktallent - 07-17-19 10:00 AM

RE: [DG11] Interfacing Axiom 9 with old products (240 VHF/DSC and Tridata) - Derek - Raymarine - Moderator - 07-19-19, 11:28 AM

User(s) browsing this thread: 1 Guest(s)