[CA] [CA11] C80 classic upgrade to 5.16 not working
|
07-19-19, 12:53 PM
(This post was last modified: 07-19-19 12:56 PM by Chuck - Raymarine - Moderator.)
Post: #4
|
|||
|
|||
RE: [CA11] C80 classic upgrade to 5.16 not working
Welcome to the Raymarine Forum grba5917,
Upon seeing your report, I phoned Radar Marine ((360) 733-2012) and got through on the first attempt. That said, they are indeed busy, so it's best to leave a message (and be patient) or to order the software update card via Radar Marine's web page. Alternatively, send a message with your phone number to [email protected]. Unfortunately, the C-Series Classic MFDs are exclusively compatible with Navionics Gold and HotMaps cartography which has been programmed onto a Navionics CF chart card. Gold cartography has been replaced by Navionics+ cartography products with. If using a Navionics+ chart card with these MFDs, the chart card's contents will typically need to be erased (via the Navionics Chart Installer program) and then re-populated with no more than 2GB of nautical charts for the geographic area in which the boat will be operated. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] C80 classic upgrade to 5.16 not working - Msy380 - 07-30-18, 10:53 AM
RE: [CA11] C80 classic upgrade to 5.16 not working - Chuck - Raymarine - Moderator - 07-30-18, 12:42 PM
RE: [CA11] C80 classic upgrade to 5.16 not working - grba5917 - 07-19-19, 10:58 AM
RE: [CA11] C80 classic upgrade to 5.16 not working - Chuck - Raymarine - Moderator - 07-19-19 12:53 PM
RE: [CA11] C80 classic upgrade to 5.16 not working - grba5917 - 07-19-19, 06:29 PM
RE: [CA11] C80 classic upgrade to 5.16 not working - Chuck - Raymarine - Moderator - 07-22-19, 10:32 AM
|
User(s) browsing this thread: 4 Guest(s)