Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Losing the GPS Signal and "Go To" Function

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Losing the GPS Signal and "Go To" Function
07-22-19, 02:43 AM (This post was last modified: 07-22-19 09:12 AM by Chuck - Raymarine - Moderator.)
Post: #12
RGG Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2019
Reputation: 0
RE: [CA11] Losing the GPS Signal and "Go To" Function
Hi Chuck,

I have attached a photo of the Axiom Pro on its bracket in the cockpit, I also attach the Axiom screenshot satellite view from the GPS settings and the error log from last week when the 'go-to' / route follow stopped mid passage. I running the latest version of Lighthouse 3. I don't believe there are any other RF transmitting devices within 3' of the MFD. I also tested the position acquisition from a cold boot, this was 20 seconds - chart screen shown a position in Miami, 20 seconds later it shows the correct position down to the actual pontoon berth in my home marina. There are no other GPS sources on the SeatalkNG network and the MFD is set to use internal GPS.


Attached File(s) Thumbnail(s)
           
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Losing the GPS Signal and "Go To" Function - RGG - 07-22-19 02:43 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication