Raymarine forum / Raymarine Forums / Product Selection Assistance v / [DG] [DG11] C70 , AIS via seatalkng2 port?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] C70 , AIS via seatalkng2 port?
07-24-19, 06:46 AM
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] C70 , AIS via seatalkng2 port?
Hi Daisy 2476

Thank you for your enquiry.

The C70 predated NMEA2000 and STng and so the SeaTalk2 connection is limited, it will not pass AIS data, so the best advice is to leave it connected as it is, connect the new Evolution autopilot via an E22158 SeaTalk to STng converter.

The Wireless equipment can be connected to the STng backbone you will have constructed for the Evolution pilot using a Microtalk Puck. If you upgrade the c70 , then you can switch the replacement over to NMEA2000/ STng and you should be all set.
Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [DG11] C70 , AIS via seatalkng2 port? - Derek - Raymarine - Moderator - 07-24-19 06:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication