Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Software Glitch - Axiom 12

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Software Glitch - Axiom 12
07-24-19, 08:37 AM (This post was last modified: 10-08-19 03:49 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Software Glitch - Axiom 12
David,

There were many odd issues related to the LH3 v3.8.x, v3.9.x, and now we've been receiving such reports with v3.10.x software, many of which, were corrected through execution of the Power ON Factory Reset procedure but reappear following a restoration of settings for those which had been previously saved to a microSD memory card. It is recommended the Power ON Factory Reset procedure be executed on each of the system's MFDs to correct the reported behavior and that the MFD(s) then be manually reconfigured. Should the problems persist after having performed the items recommended above, then please respond according and include a system diagram of your system. Please additionally indicate whether PGN 127497 has been configured to be used by the Fuel Manager feature.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Software Glitch - Axiom 12 - Chuck - Raymarine - Moderator - 07-24-19 08:37 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication