[CA] [CA11] Moving Secondary MDF between Boats

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum lwitty,

Waypoint, route, and track data are maintained within the system's Data Master MFD. Before removing the a98 MFD from the system featuring the e125 MFD, ensure that both MFDs are switched ON and have completed initialization. After doing so, configure the a98 as the system's Data Master MFD. The waypoint, route, and track data should then be transferred to the a98 MFD's memory. When the a98 MFD is later re-introduced to the system featuring the e125 MFD, power both MFDs ON, and then configure the e125 MFD as the system's Data Master MFD. The waypoint, route, and track data should then be transferred back to the e125 MFD's memory.