Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Software Glitch - Axiom 12

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Software Glitch - Axiom 12
07-25-19, 07:29 AM (This post was last modified: 07-25-19 07:51 AM by Chuck - Raymarine - Moderator.)
Post: #3
[email protected] Offline
Junior Member
**
 		Posts: 21
Joined: May 2016
Reputation: 0
RE: [CA11] Software Glitch - Axiom 12
Thanks Chuck for your prompt reply.
The Factory Reset did the trick for the Reset problem. I have not seen the MFD reset since the factory reset. Also I fully reconfigured the MFD.

For the fuel problem, attached is some screenshot. You can see the problem still persist with a factory reset. The value are still strange. I'm using PNG127489. The fuel flow and tank level calculation work perfectly. The problem appear to be at the calculation level.

For the Fuzzy font, I'm including a short video.

If you need additional detail, feel free to email me directly.
David


Attached File(s) Thumbnail(s)
               

.mov  IMG_2543.MOV (Size: 28.19 MB / Downloads: 276)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Software Glitch - Axiom 12 - [email protected] - 07-25-19 07:29 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication