Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Heading vector needs to be updated

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Heading vector needs to be updated
07-25-19, 02:45 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Heading vector needs to be updated
Welcome to the Raymarine Forum Andrew,

Please click here to view a FAQ addressing this subject. As indicated therein, this symptom is indicative of a problem with the system's heading data source, which is most commonly the system's autopilot. Should you identify the make/model of marine electronics product which is supplying heading data to the system, then we may be able to advise you further concerning how this issue may be correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Heading vector needs to be updated - Chuck - Raymarine - Moderator - 07-25-19 02:45 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication