The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Stability of eS127 with v3.10.39 - Bermuda

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Stability of eS127 with v3.10.39 - Bermuda
07-25-19, 05:33 PM (This post was last modified: 07-30-19 02:13 PM by Chuck - Raymarine - Moderator.)
Post: #1
hubesail Offline
Junior Member
**
 		Posts: 40
Joined: May 2016
Reputation: 0
[CA11] Stability of eS127 with v3.10.39 - Bermuda
Hi,

Do you have any experince yet on whether the v3.10 software is more reliable than the v3.9 with the older eS127 units?

I have two eS127 units that I upgraded to v3.9. One worked pretty reliably, the other had lots issues. It would be swiching zooms, changing screens, and rebooting. All that was after I did the Power On Resets and stopped using sonar logging and tracks.

Finally I went back to the v2.19 software which is where I am now.


Thanks, Hube
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Stability of eS127 with v3.10.39 - Bermuda - hubesail - 07-25-19 05:33 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication