[TG11] E95 does not output AIS data on NMEA0183

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] E95 does not output AIS data on NMEA0183

07-25-19, 08:06 PM (This post was last modified: 07-26-19 07:53 AM by Chuck - Raymarine - Moderator.)

Post: #3

GSwannell Offline

Junior Member

Posts: 5
Joined: Mar 2016
Reputation: 0

RE: [TG11] E95 does not output AIS data on NMEA0183

Hi Tom,
Thanks very much for the reply. Sorry I missed it last week hence why I posted another thread. I did not tick the subscribe for notifications! I understand what you are saying and will now probably buy a NGW-1-USB which should work fine coming off the NMEA2000 backbone. Good point about the power supply to the AIS650 from the USB connection so if I do use that interface again will pull the circuit breaker for AIS power supply.
Regards
Graham

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] E95 does not output AIS data on NMEA0183 - GSwannell - 07-17-19, 06:10 AM

RE: [TG11] E95 does not output AIS data on NMEA0183 - Tom - Raymarine - Moderator - 07-23-19, 03:15 AM

RE: [TG11] E95 does not output AIS data on NMEA0183 - GSwannell - 07-25-19 08:06 PM

RE: [TG11] E95 does not output AIS data on NMEA0183 - Tom - Raymarine - Moderator - 07-30-19, 02:40 AM

User(s) browsing this thread: 1 Guest(s)