The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] No Speed 0or Temp from DST800 Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] No Speed 0or Temp from DST800 Transducer
07-28-19, 04:00 PM (This post was last modified: 07-31-19 03:47 PM by Chuck - Raymarine - Moderator.)
Post: #1
2flit Offline
Junior Member
**
 		Posts: 4
Joined: Oct 2016
Reputation: 0
[CA11] No Speed 0or Temp from DST800 Transducer
We have a dst800v transducer connected to the ITC-5 and an Axiom7 chartplotter with I70s displays. The temperature failed 3,000 nm ago and the speed failed about 500nm ago. Depth is still reporting. The ITC-5 led indicates no signal on its LED for the speed and temp
Should we replace the transducer or the ITC-5, how do I tell which?
We don't have a transducer tester or a spare transducer (nor spare ITC-5). We do have a Fluke model 87 DVM and a clamp-on hall effect sensor
What is my next step to correct the problem?
John
Farrier F39
Taha'a , French Polynesia
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] No Speed 0or Temp from DST800 Transducer - 2flit - 07-28-19 04:00 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication