Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] how to Connect AIS 700 to C80 if NMEA 0183 already used on C80?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] how to Connect AIS 700 to C80 if NMEA 0183 already used on C80?
07-30-19, 01:41 PM (This post was last modified: 08-01-19 07:51 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] how to Connect AIS 700 to C80 if NMEA 0183 already used on C80?
Welcome to the Raymarine Forum Marc,

The AIS350, AIS650, and AIS700 each feature an internal 4800 BAUD to 3800 BAUD NMEA Multiplexer to address situations such as you have described. This would then permit the 38400 BAUD NMEA 0183 leads of the AIS350/650/700 Power/NMEA 0183 Cable to be interfaced to the MFD's NMEA 0183 cable and the 4800 BAUD NMEA 0183 leads of the AIS350/650/700 Power/NMEA 0183 Cable to be interfaced to a 4800 BAUD device(s) within the system. Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] how to Connect AIS 700 to C80 if NMEA 0183 already used on C80? - Chuck - Raymarine - Moderator - 07-30-19 01:41 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication