[TG11] Wind Vane Mounting Orientation

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Wind Vane Mounting Orientation

07-30-19, 02:51 PM (This post was last modified: 08-01-19 08:08 AM by Chuck - Raymarine - Moderator.)

Post: #5

mjbowden Offline

Junior Member

Posts: 3
Joined: Jul 2019
Reputation: 0

RE: [DG11] Wind Vane Mounting Orientation

Hi Tom,

I did actually try this - I was under the assumption it needed to be 180 degrees but got some weird readings after i did it. I did this through User Cal - is the post installation alignment calibration you are referring to the going to circles twice - or a calibration menu?

Thanks.

« Next Oldest | Next Newest »

Messages In This Thread

[TG11] Wind Vane Mounting Orientation - mjbowden - 07-17-19, 06:31 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 07-24-19, 02:47 AM

RE: [DG11] Wind Vane Mounting Orientation - mjbowden - 07-30-19 02:51 PM

RE: [TG11] Wind Vane Mounting Orientation - billc42 - 07-24-19, 12:51 PM

RE: [DG11] Wind Vane Mounting Orientation - Derek - Raymarine - Moderator - 07-25-19, 07:16 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 08-04-19, 06:51 PM

RE: [TG11] Wind Vane Mounting Orientation - mjbowden - 08-05-19, 05:15 AM

RE: [TG11] Wind Vane Mounting Orientation - Tom - Raymarine - Moderator - 08-06-19, 04:54 PM

User(s) browsing this thread: 1 Guest(s)