[CA] [CA11] e95 Speed vs speed over ground
|
07-31-19, 03:24 PM
(This post was last modified: 08-01-19 08:20 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] e95 Speed vs speed over ground
daknecht,
Please click here to view a FAQ addressing the differences between SOG and Speed Through Water. STW calibration was never fully implemented with LightHouse II software and only supports the P79S in-hull depth transducer. Calibration of an instrument sensing speed through water must be performed through the instrument which the transducer has been interfaced to unless the transducer has been interfaced to an iTC-5 or is a Smart Transducer. Instead, Smart transducers as well as transducers which have been interfaced to an iTC-5 must be calibrated by an i70S/i70 MFID within the system. Alarms and offsets associated such transducers must also be configured within the i70S/i70 MFIDs. Details for speed through water calibration may be found with 7.3 Speed calibration of the i70S Instrument Installation & Operation Instructions . Please click here to view a FAQ addressing GPS SOG vs Speed transducer calibration effects. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] e95 Speed vs speed over ground - daknecht - 07-30-19, 09:23 PM
RE: [CA11] e95 Speed vs speed over ground - Chuck - Raymarine - Moderator - 07-31-19 03:24 PM
|
User(s) browsing this thread: 1 Guest(s)