Raymarine forum / Raymarine Forums / Networking / System Integration v / [LW] [LW11] SeaTalk Converter vs Connector

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] SeaTalk Converter vs Connector
08-01-19, 10:20 AM
Post: #11
Tizor Offline
Junior Member
**
 		Posts: 9
Joined: May 2018
Reputation: 0
RE: [LW11] SeaTalk Converter vs Connector
Thank you for your response. One additional question on this. As noted above, my Raystar 125 is interfaced with the E 120 Classic Data Master via its' nmea 0183 port. Is it also necessary to feed the Raystar 125 output to the nmea input on the ST5000+? I'm guessing not.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [LW11] SeaTalk Converter vs Connector - Tizor - 08-01-19 10:20 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication