The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Multi function Display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Multi function Display
08-01-19, 07:22 PM (This post was last modified: 08-05-19 02:16 PM by Chuck - Raymarine - Moderator.)
Post: #1
Myhydrasport25 Offline
Junior Member
**
 		Posts: 4
Joined: Aug 2016
Reputation: 0
[CA11] Multi function Display
I have an E127 and EV-1 with a P70 Auto pilot. My question is : When I have the Autopilot engaged I get a "header" along the bottom of the E127 with status of the Autopilot. It has a "Standby" button on the left, It tells me the route I have loaded and distance to waypoint etc. I can read most of the info, but how can I increase the font of the "header" running at the bottom of my screen. I struggle to read the small font. I have all of my manuals, but either, I don't speak RAYMARINE, or the topic is not being worded properly by me when I try to look it up. Any help would be appreciated.
Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Multi function Display - Myhydrasport25 - 08-01-19 07:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication