[CA11] Stability of eS127 with v3.10.39

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Stability of eS127 with v3.10.39 - Bermuda

08-02-19, 10:51 AM

Post: #3

kevindr Offline

Junior Member

Posts: 14
Joined: Dec 2017
Reputation: 0

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda

I also updated my es127 from LH II to 3.10. First night of use I had two stability issues. The first was that the race countdown timer was not accurate and widely fluctuated, at times, even reversing countdown.

The second, and more importantly, was that vessel position would be start off fine then be off location. It appeared to happen when I rounded marks. A shut down and restart corrected it, but then it would happen again.

I did not do a power on reset after installation. Should I ?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Stability of eS127 with v3.10.39 - Bermuda - hubesail - 07-25-19, 05:33 PM

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - Chuck - Raymarine - Moderator - 07-30-19, 02:20 PM

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - kevindr - 08-02-19 10:51 AM

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - Chuck - Raymarine - Moderator - 08-05-19, 09:19 AM

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - kevindr - 08-05-19, 09:39 AM

RE: [CA11] Stability of eS127 with v3.10.39 - Bermuda - Chuck - Raymarine - Moderator - 08-06-19, 08:21 AM

User(s) browsing this thread: 1 Guest(s)