[CA] [CA11] Rudder indicator

[tonyiiiafl]

At present I have a vintage Raystar 650(?) auto pilot. It runs alone not interfaced with anything. It is fully functional. I have e97 and e127 MFD’s, networked with Raystar 130, B744 Transducer and Q2 radar. The e97 is the master. I have bought an evolution auto pilot EV200.
Question,

Can I use the existing ruder indicator sensor with this?

Once I set up the pilot system, do I link it together with the MFD’s by running a network cable from the blue socket on the MFD network to the blue socket to the Autopilot network?

Thank. You!