European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
AIS 
/
[TG] [TG11] AIS700 integration c80 not getting GPS fix now
/
[TG] [TG11] AIS700 integration c80 not getting GPS fix now
|
[TG] [TG11] AIS700 integration c80 not getting GPS fix now
|
|
08-02-19, 08:00 PM
(This post was last modified: 08-05-19 03:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[TG11] AIS700 integration c80 not getting GPS fix now
I have just installed a new Raymarine AIS700 in my boat as per table in your thread and interfaced to MFD using NMEA 0183. I subsequently changed c80 plotter system setup to NMEA rate to 38400, have green status light on AIS700 and can now see boat on marine tracker app. This is good, but the GPS data to c80 plotter and Ray55E VHF radio and Icom IC-M801E HF radio has gone. Also no AIS data showing on c80 MFD. MFD software version is 5.16.
Question: The Raystar 112LP GPS transducer associated with c80 plotter is still connected to MFD NMEA 0183 cable, green and white wires on steering pedestal mounted c80 plotter. As GPS fix is not working now, is GPS wired to correct place?. Also DSC HF radio “GPS source†is wired to DSC VHF NMEA IN grey and purple wires. GPS signal to both HF and VHF radios is not functioning anymore. Can you help me with GPS and radio wiring issue please? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] AIS700 integration c80 not getting GPS fix now - Swish - 08-02-19 08:00 PM
RE: [TG11] AIS700 integration c80 not getting GPS fix now - Tom - Raymarine - Moderator - 08-15-19, 10:38 PM
|
User(s) browsing this thread: 1 Guest(s)