[CA] [CA11] iTC-5 not MDS compatible?

[Chuck - Raymarine - Moderator]

Welcome back to the Raymarine Forum jfitch,

Please click here to view a thread in which I had recently addressed this subject. Accordingly, please ensure that all other devices within the system have been updated with the latest respective product software.

STW and wind would need to be determined by the i70/i70S MFID within the system. Please ensure that the Transducer Set-Up feature (MENU->SET-UP->TRANSDUCERS SET-UP) has been executed for both wind and speed. The MFD will merely repeat such data and permit dependent features to be used if such data is present. Should the system feature only one source of STW and wind, then there would be no need to configure a Speed source and wind source via the Data Sources feature. Accordingly, troubleshooting should begin with the i70/i70S MFID within the system to ensure that STW and wind have been calibrated via the i70/i70S MFID.

See my opening remark concerning operation with the latest available product software. Should this be the case within your system, then please attach a diagram of the system showing each marine electronics device within the system and how they have been interfaced to one another.

As a side note, unlike True Wind, AWA and AWS are not dependent upon STW data.