[LW] [LW11] E7 radar overlay

[Louise - Raymarine - Moderator]

Dear dcneuro,

Thank you for your post.

The image you have sent displays your COG vector, to enable radar overlay and head up/ course up the vessel will need to be underway by at least 2 knots. These functions will then be enabled.

Without a heading source none of these functions will be available when stationary. Not having heading data will also affect your wind and tide data as the MFD has no data to calculate with.

Heading data is normally supplied by the compass on the autopilot or a smart heading sensor installed on the network, have you either of these to provide heading data to the network?

Many Thanks
Louise