Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Chart blank after switching views - Axiom Pro 16

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Chart blank after switching views - Axiom Pro 16
08-08-19, 09:53 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Chart blank after switching views - Axiom Pro 16
Welcome to the Raymarine Forum Adam,

There were many odd issues related to the LH3 v3.8.x, v3.9.x, and now we've been receiving such reports with v3.10.x software, many of which, were corrected through execution of the Power ON Factory Reset procedure but reappear following a restoration of settings for those which had been previously saved to a microSD memory card. It is recommended the Power ON Factory Reset procedure be executed on each of the system's MFDs to correct the reported behavior and that the MFD(s) then be manually reconfigured. Should the problems persist after having performed the items recommended above, then please respond according.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Chart blank after switching views - Axiom Pro 16 - Chuck - Raymarine - Moderator - 08-08-19 09:53 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication